Warning - Kayaking can be hazardous.

Warning - Kayaking can be an enjoyable pastime, however it does carry with it inherent risks. Professional
instruction, wearing immersion protection clothing and PFD, and practice in self and assisted rescues will
help to minimize the risk however it cannot be eliminated. By using a Friday Harbor paddle, the user
acknowledges said risk and releases Friday Harbor Paddles, and its agents, from any and all liability.
Always carry a spare paddle.
______________________________________________________________________________________

Have your paddle Custom Built  .................Base Price $230   for a paddle
ready to be finished by you or chose from optional finishes below
.

Fill in the form below and push the Submit button and I will email you a confirmation of the
specifications plus the options that  you have chosen and the total cost including shipping.  If it all
looks right to you, you will be able to click a "PAYPAL  Buy Now" button .

Money Back Guarantee
If you are not completely satisfied with your paddle, just return the paddle within 30 days of your
purchase and I will refund your payment.  After 30 days see the Warranty below.
Lead time on custom paddles is 1 to 2 weeks.
(Does not include shipping time.)
_________________________________________________________________________________________
Specification Form
Your name:
Street
Your email address:
City
Your phone number:
State
Zip Code
Comments , questions,
or special requests
The following information for choosing Greenland Paddle specifications is just a guide.  
What works best for a particular paddler and kayak and paddling style is very subjective and
therefore best determined by experience.  But this information will get you started.
1.  Paddle Length
While keeping your feet flat on the ground extend your arm above your
head and measure the distance from the ground to the point where
your fingers would just curl over the top or the paddle tip.  This may be
about 80 to 90 inches.  If you are paddling a double or an especially
wide kayak let me know and I will adjust the length accordingly.
You can also choose the 72 inch
storm paddle which some people like
to carry as a spare.
2.  Loom Length   
Stand straight with your arms hanging naturally at your sides, bend
your elbows to 90 degrees so your forearms are parallel to the floor
and position your hands as if you were holding a paddle. Then  
measure the distance between the outsides of your hands.   
Approximately 17 to 24 inches.
3.  Blade Width
The GP blade width at the tips should be small enough for you to hold
onto comfortably while rolling or bracing.  A good way to determine the
width is to form a C with your thumb and index finger and measure the
hight of the opening.   Usually between 2 3/4" and 4".  If you are ordering
a GP with horizontal laminations you can select a paddle width up to 3
1/2".    If you are ordering a GP with vertical laminations you can select a
width up to 4 ".
4.  Blade Tip Shape
You can choose the tip shape you like best.  Half circle, roundish,
Squarish, or Square
4. Blade Edges
Rounded edges are recommended for most paddlers.  Blunt rounded
edges are more forgiving of paddling technique.  They are less prone
to flutter and make rolling and bracing easier.  Sharp edges are quieter,
and are preferred for racing since they provide more bite.
5. Loom Cross-section
Form an "O" with your index finger and thumb and measure the
opening.  
You will probably get a measurement of about 1 1/4" by 1 1/2".  This
would be your loom cross-section measurement.
6. Paddle Flexibility  (soft, medium, or firm)  
For a paddle that is especially easy on your joints and muscles you
might choose soft, but if you are a more aggressive paddler you would
probably want to go with a firm paddle.
Vertical
Lamination
7. Vertical or Horizontal Laminations
The main difference is the visual effect, but vertical laminations provide a
slightly stiffer paddle.
8.  Shoulder
A GP with no shoulder might be best if you  paddle boats of
different  beams.  Some people like a shouldered blade because
it helps to find the proper orientation of the paddle to the water
without having to look, for others it's just a matter of aesthetics.
Paddle
with
abrupt
shoulder.
All paddles are:
  • Constructed to your specifications as indicated
    above.
  • Handcrafted to weigh less than 35 oz.
  • Built from 5 layers or more of straight grain red
    cedar that have been laminated together with
    epoxy for extra strength and durability.   
  • Sanded with 180 grit sandpaper ready to be
    finished by you, or choose from the optional
    finishes below.
Base Price  $230
_________________________________________________________________________________________
Options
Two Piece Take-Apart Carbon Ferrule ...................Add $60
The addition of a two piece Carbon ferrule to your paddle makes it easier to
transport and easier to stow on your deck as a spare.  It also
 reduces your
shipping cost by $10.
 The ferrule has a stainless steel release button which
allows the paddle to be feathered if you desire.  You can also order a
paddle
sock to give your two piece GP extra protection while it is not in the water.
Carbon
Ferrule
........................................................................................................................................................................
Optional finishes
...........................Add $25 - $40
100% Tung Oil .................................................................................$25
Probably the easiest to apply and repair, it  provides good protection against the
elements.
 
Tung Oil and Marine Varnish Blend (Satin)...............................$30
Provides a slightly stronger finish than tung oil alone.
Marine Varnish (Satin).....................................................................$35
Marine Varnish  ( Gloss) .................................................................$45
Provides a strong glossy finish.  
Epoxy Base Coat followed by Varnish ......................$55- $65
One coat of penetrating epoxy applied to the whole paddle strengthens the surface fibers
and makes the GP less susceptible to dings, scratches and water penetration.   Epoxy is
followed by a UV blocking  marine varnish, either satin or glossy.
...........................................................................................................................................................................
Optional blade tips
You might want to add optional tips to give your GP extra toughness
and durability.   The tips will add a little extra weight also.
Hardwood tips ...............$35   Three inch Hardwood tips can be laminated to the end of
your GP to increase durability.  The hardwood choices are walnut, maple, and ash.
Epoxy Tips..............   $35-$55
You can select  4 coats of clear epoxy or colored thickened epoxy.  Currently
the color choices for the thickened epoxy are white, red, and black.  The white
looks similar to the traditional Greenland paddle where whale bone was used
to protect the tip.  
____________________________________________________________________________________
Shipping and handling to anywhere in the continental US
One piece paddle.......................................................................... $30
Two piece paddles.........................................................$20
International  shipping is available.
If you buy two or more paddles at a time you will save on shipping.    Each additional
paddle is only $10.
Fill in the form  and push the Submit button and I will email you a confirmation of the
specifications plus the options that  you have chosen and the total cost including
shipping and handling.  If it all looks right to you , you will be able to click a "PAYPAL  
Buy Now" button  to pay with Paypal, credit card, or personal check.
Lead time on custom paddles is currently  4 weeks.
Does not include shipping time.
_____________________________________________________________________________________
All images and text are copyright by David Smith unless otherwise noted and may not be used without the
prior written approval of the copyright holder.
Warranty
Warranty is on materials and workmanship, for one year from the shipping date. This is limited to
replacement of the paddle only.
Friday Harbor Paddles are handcrafted in Friday Harbor, Washington.
Custom Order a
Greenland Paddle

Friday Harbor Paddles
Elegant lightweight Greenland paddles custom made from seven
layers of red cedar, and laminated with epoxy.  Built to  Your
Specifications.  You can choose optional finishes and blade tips.
$230
To Order a paddle sock to protect your Greenland style paddle while it is not in the
water click
here
Horizontal
Lamination
3A
3E
3D
3C
3B
3G
3F